|
MCB-4B Stepping Motor
Intelligent Motion Driver/Controller
The MCB-4B
Stepping Motor Intelligent Motion
Driver/Controller is an open
frame 4- axis integrated stepping
motor driver/controller that drives
and controls any 2-phase stepping
motors with phase currents from 0.25
to 3.0Amps/phase, simultaneously.
The MCB-4B performs indexing
functions without the need of a host
computer, but can operate under the
control of a host. The MCB-4B's
internal nonvolatile memory will
store and execute a programmed
instruction set, with four on-board
toggle switches providing manual jog
control. High efficiency , low noise
motor drivers provide programmable
full, half, quarter and one eighth
step per full motor step, with
torque compensation.
Find full
driver support for the MCB-4B
Driver/Controller in Certified
Scientific Software's spec
X-Ray Diffraction and Data Acquisition
software
Find full
I/O device support for the MCB-4B
Driver/Controller in EPICS Experimental
Physics and Industrial Control System
Software
|
MCB-4B Features |
|
Drives 4 (four) two-phase
stepping motors rated from
.025 to 3.0 Amps/phase |
|
4, 6 or 8 lead stepping
motors |
|
Low noise Bi-polar driver
construction. |
|
Speeds to 50,000 steps per
second |
|
Nonvolatile memory for
motion control programming
using ASCII instruction set,
or |
|
Host computer communications
by serial link using either
RS-232C or RS-485 |
|
Programmable
acceleration/deceleration |
|
Home and two limit inputs
for each motor |
|
Motor current shut off
switch |
|
Comprehensive instruction
set |
|
Several addressable boards
can be controlled by a
single communications port |
|
|
|
Optional Equipment |
ACS Part Number |
|
Chassis Mount Single Board
Enclosure |
MCE-1 |
|
Limits/Home Interface Board |
MCB-4I |
|
|
|
32-Axis Rack Mount Options |
ACS Part Number |
|
19" (48.26cm) Rack Enclosure
holds up to 8 (eight) MCB-4B
Boards |
MCA-9 |
|
MCA-9
-
GPIB to Serial
Communications Interface |
CIB-488 |
|
MCA-9 -
RS-232 /RS-485
Communications Interface |
CIB-232 |
|
|
|
|
Compatible Power Supply |
ACS Part Number |
|
5VDC Logic / 12-40VDC Motor |
PSU-404 |
|
