All Advanced Control
Systems Corporation Motor Drivers, Servo Amplifiers,
Interface Modules and Controllers are designed,
developed, manufactured and assembled with great quality
and efficiency in our facilities in the United States of
America.
The Step-Pak Modular Motion Control System
Step-Pak™
and Step-Pak
Plus™
Indexer
Interface Modules
Step-Pak Plus ™ SPC-5
Interface Module
The
Step-Pak Plus™
SPC-5 Interface
Module
provides 2 (two) 52-pin
SCSII connectors for pin
to pin direct connection
to the Pro-Dex (OMS)
MAXv-8000, 8-Axis VME
Controller. The SPC-5
Interface Module
provides full Step-Pak
stepper and servo module
capability from the
MAXv-8000.
MAXv-8000 is a trademark
of Pro-Dex, Inc.
Step-Pak™ SPC-4
Interface Module
The
Step-Pak™
SPC-4 Interface
Module
provides 8 (eight) RJ-45
front panel connectors
for the connection of an
external eight channel
indexer or controller.
The SPC-4 facilitates
quick and easy system
wiring through the use
of standard modular
jacks and cables.
Step-Pak™ SPC-3
Interface Module
The
Step-Pak™ SPC-3 Interface
Module provides 8
(eight) DB-25 front
panel connectors for the
connection of an
external eight channel
indexer/controller. The
SPC-3 provides
differential receivers
on step and direction
inputs for all eight
channels. Encoder
outputs connected to the
back panel of the SPR-9
rack are also brought to
the front panel
connectors.
Step-Pak™
SPC-2 Interface Module
The
Step-Pak™ SPC-2 Interface
Module provides 3
front panel connectors
for the connection of an
external eight channel
indexer/controller. Step
and direction inputs are
single ended and require
6mA sinking drivers.
Step-Pak™ SPC-1
Interface Module
The
Step-Pak™ SPC-1 Interface
Module provides a
direct interface to the
Pro-Dex (OMS) VME-58-8S
Controller. Differential
receivers are used for
connection to
differential encoder
outputs. A jumper option
is provided for single
board encoder outputs.
VME-58-8S is a trademark
of Pro-Dex, Inc.
* NOTE: The SPC-5 Interface Module is only compatible
with newer generation SPR-9 Plus
Step-Pak Rack Systems. The SPR-9
Plus adds servo control lines to the
traditional Step-Pak rack. All
Step-Pak SPR-9 Racks purchased after
January 2009 are Step-Pak Plus
compliant.
