|
|
 |
|
| All Advanced Control
Systems Corporation Motor Drivers, Servo Amplifiers,
Interface Modules and Controllers are designed,
developed, manufactured and assembled with great quality
and efficiency in our facilities in the United States of
America. |
|
|
|
 |
|
|
 |
|
The Step-Pak Modular Motion Control System |
|
|
 |
|
|
Step-Pak
Mini-Stepping Motor Driver Modules
 |
Step-Pak SPD-32M Bi-Polar
Mini-Stepping Motor Driver
Module
The Step-Pak SPD-32M Stepping Motor Driver
is
bi-polar, low noise,
chopper type driver with
mini-stepping
capability. The
two-phase, bi-level
design is highly
efficient and promotes
cool running of motors
and drivers, enabling
high density packaging
of equipment. Motor
windings are compared to
preset values. When
motor current reaches
the preset value, it is
turned off and starts
decaying to a preset low
value when it is turned
on again. When the motor
is held in position,
some low level switching
electrical noise is
generated.
|
|
Step-Pak SPD-32M Bi-Polar
Mini-Stepping Driver Module
Specifications |
|
Form Factor |
Step-Pak Module, 43.18mm W x
177.80mm H 330.00mm D |
|
Module Connections |
80 Pin PCB Edge Card
Connector |
|
Power Connections |
48VAC |
|
Motor Connections |
4 or 8 Lead Stepping Motors
|
|
Ministep Selector |
Front Panel BCD Switch |
|
Ministep Resolution |
Full Step, 2, 3, 4, 5, 6, or
8 Mini-steps Per Full Motor
Step |
|
Limit
Inputs
|
Two Inputs, Front Panel
Limits Status Display |
|
Home Inputs |
One Input, Front
Panel Home Status
Display
|
|
Idle Current
|
InternalLow Voltage Jumper
Setting |
|
Nominal Low Voltages
|
4, 6, 8, 10 (Volts) |
|
Running Current Selector |
Front Panel Hex Switch |
|
Running Current |
Selectable 0.05, 0.1, 0.2,
0.3, 0.4, 0.5, 0.6, 0.7,
0.8, 0.9, 1, 1.5, 2, 2.5, 3,
3.5 Amps/Winding |
|
Automatic Current Reduction |
Internal Jumper Selection
10%, 25%, 50% or 75% |
|
Motor Current OFF |
Front Panel Slide Switch |
|
Status Output |
|
|
|
|
|
 |
|
